Virtual reality has seen a revolution thanks to the Oculus Quest, which offers consumers cutting-edge technology and immersive experiences. But just like any other electrical equipment, it occasionally experiences problems.
‘No Command’ error is a common and annoying problem that users could face. We’ve got you covered if you’re staring at a blank screen as this confusing message appears.
A simple force reboot or checking battery levels might do the trick. Stubborn errors may require cleaning the volume buttons or even a factory reset, but remember to back up important data first. Always keep your software updated and use official charging accessories.
We’ll walk you through fixing the ‘No Command’ error on your Oculus Quest in this simple guide so you can resume your virtual travels without any problems.
Regardless of your level of experience with VR or familiarity with the Oculus platform, this tutorial will provide you the confidence to work through the troubleshooting process confidently. Let’s get started and help you resume your Oculus Quest!
| Step | Solution |
| 1 | Check firmware version and update if required. |
| 2 | Perform a factory reset. |
| 3 | Verify Oculus account is properly set up. |
| 4 | Check headset and controller batteries. |
By continuing to use this website you agree to our Terms of Use. If you don't agree to our Terms, you are not allowed to continue using this website.
What is The “No Command” Error on Oculus Quest?
The “No Command” error on Oculus Quest is a common issue that can occur when you try to power on or reboot your device. When this error occurs, you’ll see a black screen with a “No Command” message in white letters.
The error can happen for a variety of reasons, including:
- corrupted firmware
- low battery
- system update issues
- hardware issues
The “No Command” error can be frustrating, especially if you want to return to your VR games and experiences.
However, by understanding the causes of the error, you can start to troubleshoot the problem and get your Oculus Quest back up and running.
Also, watch the video that I’ve shared below.
How to Troubleshoot “No Command” Error on Oculus Quest
Fixing the “No Command” error on Oculus Quest can be a straightforward process, but it does require some troubleshooting. Here are some measures you can take to fix this issue:
- Charge your Oculus Quest: If the “No Command” error is due to a low battery, plugging in your device to charge can help. Leave it charging for a few hours before trying to turn it on again.
- Perform a soft reset: Try a hard reset if your device still shows the “No Command” error after charging. To do this, press and hold the power and volume down buttons simultaneously for 30 seconds. Your device should reboot, and the error may be fixed.
- Clear cache partition: If the above steps don’t work, try clearing the cache partition. You’ll need to enter the device’s recovery mode to do this. First, power off your Oculus Quest. Then, hold down the power and volume buttons simultaneously until the device powers on. Release the power button but hold the volume down button until the recovery mode menu appears. After that, choose “Wipe Cache Partition.” Then, you have to choose “Reboot System Now.”
- Factory reset: If none of the earlier measures work, you may need a factory reset. This will delete all data on your Oculus Quest, so it is better to back up any important files before proceeding.
To factory reset your Oculus Quest, follow these steps:
- Power off your device.
- Hold down the power and volume buttons simultaneously until the device powers on.
- Release the power button but hold the volume down button until the recovery mode menu appears.
- Choose “Wipe data/factory reset,” and now, to confirm it, press “Yes.”
- Once the process is complete, select “Reboot system now.”
You can fix the “No Command” error on your Oculus Quest by following these steps. However, if the error persists, you may need to contact Oculus support for further assistance.
Fun Fact: Oculus Quest 2 does not need any console, PC, or sensor to operate. Everything is built-in inside the headset.
Common Mistakes When Trying to Fix The “No Command” Error
Fixing the “No Command” error on Oculus Quest can be frustrating, and it’s easy to make mistakes when troubleshooting the problem. Some common mistakes that we should avoid are discussed below:
- Not charging the device long enough: It is important to give it enough time to charge fully before turning it on again. If the battery is still low, you may continue to see the “No Command” error.
- Not performing a hard reset correctly: Make sure to hold down the power button and volume down button simultaneously for the full 30 seconds when performing a hard reset. Releasing the buttons too early may not solve the problem.
- Clearing the wrong cache partition: Select the correct option when entering recovery mode to clear the cache partition. Selecting the wrong option may cause data loss or other issues.
- Not backing up data before performing a factory reset: A factory reset will erase all data on your Oculus Quest, so it’s important to back up any important files before proceeding.
- Not contacting Oculus support for assistance: If you’ve tried all the troubleshooting steps and the “No Command” error persists, don’t hesitate to contact Oculus support. They may be able to provide additional guidance or even replace your device if necessary.
By avoiding these common mistakes and systematically troubleshooting, you can increase your chances of fixing the “No Command” error on your Oculus Quest.
Advanced Troubleshooting For The “No Command” Error on Oculus Quest
If you’ve tried the basic troubleshooting steps for the “No Command” error on your Oculus Quest and it’s still not working, there are some advanced troubleshooting steps you can take. Here are a few:
- Check for firmware updates: Ensure your Oculus Quest runs the latest firmware. To check for updates, go to the Settings menu, then select “Device.” From there, select “About” and look for any available updates. If you see an update, follow the commands to install it.
- Try a different power source: If you’re having trouble charging your Oculus Quest, try using a different power source, such as a different wall outlet, USB port, or even a different charging cable.
- Perform a USB reset: To perform a USB reset, turn off your Oculus Quest and unplug it from any USB cables. Then, hold the power and volume down buttons simultaneously for 30 seconds. Release the power button, but keep holding the volume button until the device powers on. Plug your device into a USB port on your computer and check if the error persists.
- Check for hardware issues: In rare cases, the “No Command” error can be caused by a hardware issue. Examine carefully for any apparent damage or signs of wear and tear. If you notice anything unusual, contact Oculus support for further assistance.
- Perform a factory reset from recovery mode: If a factory reset from the device’s settings menu isn’t working, try performing a factory reset from recovery mode. To do this:
- Power off your Oculus Quest, then hold down the power and volume down buttons simultaneously until the device powers on.
- Now, release the power button but hold the volume down button until the recovery mode menu appears.
- Choose “Wipe data/factory reset” and confirm it by pressing “Yes.
- Once the process is complete, press “Reboot system now.”
By taking these advanced troubleshooting steps, you can increase your chances of fixing the “No Command” error on your Oculus Quest.
Oculus Quest wont boot. Just says No Command
byu/Simulation_Samurai inOculusQuest
FAQs
Why does the “No command” error happen?
There are several potential reasons why the “No command” error might occur. These can include problems with the headset’s firmware, issues with the user’s Oculus account, or hardware-related problems like low battery levels.
How can I fix the “No command” error on my Oculus Quest?
There are several steps you can take to try and fix the “No command” error, including updating your headset’s firmware, performing a factory reset, and checking your Oculus account settings.
What if the “No command” error still persists after trying these solutions?
If you’ve tried all of the solutions outlined in the blog post and are still experiencing the “No command” error on your Oculus Quest, you may want to reach out to Oculus support for further assistance. They may be able to assist you in finding the solution.
Conclusion
- The “No command” error on Oculus Quest can be a frustrating issue to encounter, but there are several steps that you can take to resolve it.
- By checking your headset’s firmware, performing a factory reset, and ensuring that your Oculus account is properly set up, you can often fix the issue and get back to enjoying your VR experiences.
- Additionally, keeping your headset and controllers updated and properly charged can help prevent this error from occurring in the first place. Remember, if you’re still having trouble, don’t hesitate to reach out to Oculus support for further assistance.