There are three camera types offered by Blink, all of which are compatible with Amazon Alexa and are pretty similar to one another.
The main selling point of Blink is its extraordinary two-year battery life on only two AA batteries, which you probably already have somewhere in your home. It makes sense that Blink cameras would be subpar given their long battery life.
Are your Blink cameras looking a little tired lately? It might be time to change the batteries!
Don’t let your cameras run out of juice and miss any important moments.
Let’s dive into how to change Blink camera batteries and keep those cameras going strong.
Content of this article:
|How to Change Blink Camera Battery||Replacing the batteries of a Blink camera is so simple that anyone with a little guidance can do it.|
|Blink Indoor and Outdoor Cameras||Take the camera out of its mount and remove the back cover exposing the batteries then replace them.|
|Blink XT and XT2 Cameras||The procedure is pretty much the same as the indoor and outdoor cameras with a couple of changes.|
|Blink Mini||you don’t need to change the batteries of a Blink mini as it uses a Micro USB connection.|
|Which Batteries Do Blink Cameras Use?||Blink suggests using lithium batteries in their cameras.|
|What Affects the Battery Life of Blink Cameras?||Lithium Batteries, Extended Motion Clip Recording, Live-View, Poor Connectivity.|
|Lithium VS Alkaline Batteries||Alkaline batteries limit the functionality of the camera and degrade the battery faster.|
How to Change Blink Camera Battery?
Blink has made replacing the batteries very simple, so you don’t have to worry about it. You might need to make a few minor tweaks depending on the model of the camera.
Understanding how to change the battery of your security camera is essential just in case you have to do it in the future.
Blink Indoor and Outdoor Cameras
The first step is to take the gadget out of any mounts or attachments. Both of these models require you to remove the rear cover. Under it, you can find both the battery and the serial number:
- Rotate the screw counterclockwise to unfasten it. In certain devices, the screw may be covered by a silicone protective case; in this instance, you must first remove the case before removing the screw.
- You must apply pressure while removing the rear cover so that it can be removed gently.
- Take the lid off after it has become loose, and you will discover two AA lithium batteries.
- Take out the old batteries and put in fresh ones. Make sure that the new batteries are aligned properly.
- Install the rear cover and tighten the screw after changing the batteries.
Blink XT and XT2 Cameras
A few small distinctions set the XT and XT2 battery replacement process apart from the Indoor and Outdoor cameras from Blink:
- When looking at the security camera’s back, you will notice a grey switch and an arrow pointing down at the bottom of the gadget.
- Now, slide and hold the grey switch in the direction of the arrow, which is at the bottom of the device.
- Because these models are designed to be airtight, you must use gentle force to lift the battery cover with your thumb.
- After taking off the rear cover, you can swap out the old batteries with new ones. You’ll need two AA 1.5-volt lithium batteries for Blink XT and XT2.
If you’re the proud owner of a Blink Mini, then you’re in luck! You don’t have to worry about constantly changing batteries like other Blink camera models.
That’s because the Blink Mini is designed with a Micro USB connection, which means it can be powered through a cord plugged into an outlet. This not only saves you the hassle of changing batteries but also ensures that your camera is always powered and ready to capture any important moments.
So, whether you’re using your Blink Mini for home security or just keeping an eye on your furry friends, you can rest easy knowing that you won’t have to worry about battery life.
Which Batteries Do Blink Cameras Use?
Blink cameras use standard AA lithium batteries.
Specifically, Blink recommends using either Energizer Ultimate Lithium or Duracell Ultra Lithium batteries for optimal performance.
These batteries are known for their long life and ability to withstand extreme temperatures, making them ideal for use in outdoor security cameras like Blink.
So, if you need to replace the batteries in your Blink cameras, be sure to grab a pack of AA lithium batteries and keep your cameras running smoothly.
What Affects the Battery Life of Blink Cameras?
Investing in rechargeable Lithium AA batteries for your Blink camera might be a more expensive option, but it’s also a long-term investment in hassle-free battery life.
Unlike Alkaline batteries, Lithium AA batteries are designed to last longer, with an average lifespan of around two years. With Blink cameras, they can provide up to 15 hours of recorded videos even with features like live-view and motion-activated recording.
So, while you might have to shell out a little extra cash up front, you can save money in the long run by not having to constantly replace batteries. Plus, you can feel good about reducing your environmental impact by using rechargeable batteries instead of disposable ones.
Extended Motion Clip Recording
When it notices motion, Blink’s security camera will start recording. The camera uses a lot of battery power while filming, shortening the battery life.
You can stop it by reducing the camera’s sensitivity, which will reduce how frequently it records.
Live-View is a useful feature that allows you to monitor your Blink camera’s surroundings in real-time on your smartphone.
However, it’s important to note that this feature can quickly drain your battery. When using Live-View, your camera is constantly in use, which can significantly increase the battery’s depletion rate. Therefore, it’s recommended that you use Live-View sparingly and only when necessary to conserve battery life.
When your Blink security camera is not receiving strong WiFi signals, it will utilize battery power to improve the signal. The Blink camera will be more dependent on the battery as a result, it will increase battery consumption.
Lithium VS Alkaline Batteries
Depending on how often you use them, you might need to change the batteries frequently. You could opt for a less expensive battery in this situation. Although alkaline batteries are less expensive than lithium batteries, they have a shorter lifespan.
They also drastically restrict the capabilities of your Blink security camera. You won’t have any trouble turning on your Blink security camera using alkaline batteries.
However, you won’t be able to use functions like live view, motion detection, and other functions. The link suggests only using lithium batteries since they are more durable and provide more functionality than alkaline ones.
Frequently Asked Questions
Are Blink Cameras Waterproof?
The Blink Outdoor, which has an IP65 weather rating, is the only Blink camera that can withstand water. The indoor cameras from Blink are not waterproof, therefore we do not advise putting them outside in the rain or submerging them in water.
Are Blink Cameras Wireless?
Although theoretically all three of Blink’s cameras are wireless, only two of them are wire-free. It might be difficult to understand camera lingo, but wireless simply refers to how they link to your internet network.
In order to have a “real” wireless camera (also known as a wire-free camera), you should purchase either the Blink Indoor or Blink Outdoor. They have no cables and run on batteries. The power cord is required for the Blink Mini camera.
Is There a Monthly Fee for Blink Cameras?
The basic functionalities of your Blink camera are available without a membership. But yes, membership is necessary if you want to use cloud storage with Blink cameras.
But if you purchase the Blink Sync Module 2, you can skip the subscription in exchange for local storage. You don’t need to pay a monthly charge, and your film is stored on a flash drive. However, the flash drive is not free; you must pay for it.
Can you change your Blink cameras to another person?
Yes, you can change your bling camera with another person. For this, you need to remove all your information from your account. This will help you save your data and no one can access your data. Once you have deleted your information from the app, the new owner will use the bling camera accordingly.
How do I reset Blink for a new owner?
You should use a small object or your fingernail to reset the button. Press the button for 5 seconds, and you will see a red light flashing and after some time a blue light will flash on a module. Now the module is ready to function.
- Blink offers three different types s of cameras, all of which are compatible with Amazon Alexa and are pretty similar to one another.
- Blink has made replacing the batteries very simple and anyone with a little bit of tech knowledge can change them.
- Except for the Blink Mini, almost all Blink Cameras require precisely 2 AA lithium batteries.
- Using Alkaline or rechargeable batteries could damage your camera’s functionality and degrade its battery life quicker.
- Disabling features like Extended Motion Clip Recording and Live-View Feature can extend your camera’s battery life.
How To Fix HBO Max On A Fire Stick Not Working Issues? (Guaranteed fix!)
TCL Roku TV Remote Not Working (Easy Fix)
Why Arlo Doorbell is Not Recording? (Answered)
Online Security and Privacy
It’s never been more important to protect yourself online. Threats are everywhere, and scammers are getting smarter every day.
Whether you’re looking to improve your online security, enjoy more privacy, avoid others tracking you across the internet, or just want to use a streaming service from another country, a VPN can be very useful.
Here are some of the best options (affiliate links)