Skip to Content

Why Is My Samsung TV Remote Not Working Blinking Red Light? (Here’s How to Fix It)

Why Is My Samsung TV Remote Not Working Blinking Red Light? (Here’s How to Fix It)

You may have observed that the remote control’s blinking light stops if you have a Samsung TV. This can be annoying, especially if you’re watching a movie or TV show at the time.

In any case, there are a few things you can do to make sure your remote doesn’t cease blinking. We’ll show you how to prevent your Samsung remote from stopping blinking in this article. 

Turn on the TV and hold the remote control two feet away while aiming it at the screen when your Samsung remote starts blinking red. Press and hold the play/pause and return buttons at the same time for five seconds. Once pairing is complete, a remote and battery symbol will show up. 

Most people can fix their remote by just re-pairing it. There are various other tested solutions available for the remainder of you. Before deciding to buy a replacement, you should try each of them (listed below). 

Please take note that occasionally a remote’s red light flashing is directly related to a problem with your Samsung TV’s red light, so you should check it out to see if it can be resolved. 

Causes of Samsung remote blinking red 

It’s very upsetting when a Samsung remote control flashes red doesn’t work, but keep calm!

Understanding the cause of how your remote is acting can make it simpler for you to troubleshoot and rapidly resolve the issue. 

CausesExplanation
Pairing issuesYou must pair your Samsung remote control with your TV for it to function. During initial setup, the remote will automatically couple with the TV and is likely to stay linked for some time.
IR sensor interferenceWhen you try to use your Samsung remote control, it may occasionally stop responding and begin blinking red because there’s a barrier between it and your TV. Common objects like sound bars, books, children’s blocks, furniture, etc. can obstruct the line of sight to the TV receiver.
Physical damagePhysical damage to a remote control could cause it to malfunction. It may be possible to fix some parts of a broken remote control, but it’s more cost-effective to buy a new one. Samsung direct replacements are available, or you can use a universal smart remote.
Defective BatteriesThe most frequent cause of your Samsung remote’s blinking is this. Your remote may stop working and start glowing red if your batteries are deteriorating or in poor condition. The controller won’t work properly if the cells are somehow not fully charged. Check to see whether the issue is resolved by switching the batteries.
Stuck ButtonsOver time, oxidation, dirt, and filth tend to accumulate, resulting in your remote’s malfunction or complete incapacitation. Mending buttons that won’t operate isn’t too tricky. Just press and release each button on your remote-control numerous times before disassembling it.
An overview of the article

The most frequent causes of your Samsung remote not working or answering are listed below. 

1. Defective Batteries

Defected batteries
Defected batteries

The most frequent cause of your Samsung remote’s blinking is this. Although it may seem obvious, you’d be surprised how often it’s overlooked. 

Your remote may stop working and start glowing red if your batteries are deteriorating or in poor condition. The controller won’t work properly if the cells are somehow not fully charged. Check to see whether the issue is resolved by switching the batteries. 

2. Pairing issues

The most likely reason why your Samsung remote is blinking red is that there’s a connection or communication issue between the remote control and the TV. 

You must pair your Samsung remote control with your TV for it to function. During initial setup, the remote will automatically couple with the TV and is likely to stay linked for some time. 

Eventually, though, your remote control might stop working with your TV and begin blinking red whenever you try to use it. In such a scenario, you must manually pair it back. 

Fortunately, pairing your Samsung remote is simple and quick. The steps are as follows: 

  • Press the power button on the TV to turn on your Samsung television. 
  • Holding the remote control between one and two feet away, aim it at the IR sensor on the TV. 
  • Five seconds should be spent concurrently holding down the Play/Pause and Return buttons. 
  • Await the pairing process to be completed. 
  • When the pairing is successful, the screen will display the remote and battery icons. 

3. IR sensor interference

When you try to use your Samsung remote control, it may occasionally stop responding and begin blinking red because there is a barrier between it and your TV. 

When you attempt to use the remote, if it blinks red, it’s undoubtedly sending out signals. However, there can be an impediment preventing the signals from getting to the TV receiver. 

Commonplace living room items like soundbars, books, children’s blocks, furniture, etc., can obstruct your remote’s line of sight to the TV receiver. 

It could be possible to fix the problem and guarantee that the remote control works normally again by getting these objects out of the way. 

To achieve the greatest results, make sure you have a clear line of sight and point the remote squarely at the TV receiver. Additionally, when using the remote control, ensure sure it’s no closer than 1-2 feet to the IR sensor. 

Rarely, a blockage by dust or dirt may prevent the TV sensor from responding when you use the remote control. 

Cleaning the area carefully with a cotton swab or a soft cloth will help you fix this. To prevent any harm to the sensor, stay away from using spray cleansers or any liquids. 

4. Physical damage

Your remote’s ability to operate may be compromised by physical damage. Due to improper motherboard circuit connections, the remote control could still flash a red light. 

Remote controls are used frequently. Thus, regular wear and tear over time may cause it to malfunction. 

The only workable solution if the remote isn’t functioning due to physical damage is to buy a new one. It may be possible to fix some parts of a broken remote control, but it’s more cost-effective to acquire a new one. 

Direct replacements from Samsung are available, or you can use a universal smart remote. A universal remote, on the other hand, can have entirely different settings, and you might find it difficult to link it to your Samsung TV. 

5. Stuck buttons

How to Fix & Clean Your Remote Control Buttons

Sometimes the remote isn’t totally broken, but perhaps one or two buttons are stuck. 

Over time, oxidation, dirt, and filth tend to accumulate, resulting in your remote’s malfunction or complete incapacitation. 

The good news is that if you’re prepared to put in the effort, mending buttons that won’t operate due to oxidation, dirt, or grime is not too difficult. 

However, do this first: swiftly press and release each button on your remote-control numerous times before disassembling it. Even when it seems ridiculous, just do it! As many times as you can, press both the in and out buttons. 

Frequently, this is sufficient to remove whatever it’s in your remote that is preventing the button from working properly! 

Check the Manual

If you’re still having trouble making the remote operate, check your TV’s instructions. It might include guidelines for setting up the remote or resolving issues. 

Alternative methods for fixing a Samsung remote that is flashing red 

Consider power-cycling your TV and/or remote control if you have tried all the methods above, and nothing seems to be working. 

Any number of faults and problems you’re having can be resolved by power resetting your TV and remote. 

1. Power-cycle your remote control 

Power cycling
Power cycling

Resetting a Samsung remote control that’s having issues is an easy and quick procedure.

  • Of course, your remote control’s battery compartment must first be opened. 
  • Take the batteries out. 
  • Pressing the power button for at least 20 seconds will completely reset your remote by draining its capacitors of any remaining power. 
  • Put the batteries back in. 
  • Examine the remote. 

2. Power-cycle your Samsung TV: 

Many problems with your Samsung TV can be resolved by power cycling it. Additionally, the procedure is quick and simple. the following steps: 

  • Remove your TV’s plug from the electrical socket. 
  • Pressing and holding the power button for at least 60 seconds will completely reset your TV by draining any remaining power from its capacitors. 
  • Reconnect the TV’s wall outlet. 
  • Start the TV. 
  • Examine the remote 

In a last-ditch effort to fix your remote, you might think about factory resetting the TV if power-cycling it didn’t help.

Remember that you’ll need to sign into all of your streaming applications again and that all of your TV settings will be lost. 

3. Use the SmartThings app as a remote

You may manage your TV with the Samsung SmartThings app if your Samsung remote simply won’t function and you don’t want to wait for a replacement to come in. 

Set up your account after downloading the SmartThings app from the App Store or Google Play. 

You must first create an account before you can add your TV to the SmartThings app: 

  • Click the “+” symbol in the upper right corner of the SmartThings app once it has opened. 
  • After choosing Device, choose Samsung as the brand. 
  • Select TV by scrolling down. 

Your TV should be located and connected by SmartThings. Your smartphone can now serve as a remote control! 

Other Frequently Asked Questions

What does a blinking red light mean on Samsung TV? 

Answer: For the Samsung TV, a red light that flashes indicate something similar. It indicates that your TV has a bug, a software issue, or a hardware problem. 

How do I fix an unresponsive Samsung remote? 

Answer: To reset the remote, remove the batteries and then press and hold Power for 8 seconds. After that, try using the remote once more after replacing the batteries. 

How can a blinking remote be fixed? 

Answer: It can be fixed by changing the batteries, as the remote may occasionally become separated from the receiver due to a low battery. Replace the outdated batteries with new ones to resolve this. Use Energizers or Duracell’s because they have the highest energy capacity. 

Conclusion

  • There are a few things you can do to make sure your remote doesn’t cease blinking. Most people can fix their Samsung remote by just re-pairing it with their TV. Your remote may stop working and start glowing red if your batteries are deteriorating or in poor condition. 
  • When you try to use your Samsung remote control, it may occasionally stop responding and begin blinking red because there is a barrier between it and your TV. Common objects like sound bars, books, children’s blocks, furniture, etc., can obstruct your remote line of sight. 
  • Over time, oxidation, dirt, and filth tend to accumulate, resulting in your remote’s malfunction or complete incapacitation. It may be possible to fix some parts of a broken remote control, but it’s more cost-effective to acquire a new one.  
  • Direct replacements from Samsung are available, or you can use a universal smart remote. Check the manual for instructions for setting up the remote or resolving issues with your TV. 
  • Many problems with your Samsung TV can be resolved by power cycling it. Power-cycling a TV and/or remote control is an easy procedure that’s quick and simple to follow. 

Other Articles: