Skip to Content

Samsung TV Red Light Flashing? Here’s Why and How to Fix It

Samsung TV Red Light Flashing? Here’s Why and How to Fix It

Here’s a quick solution:

The easiest way to fix the red light flashing on your Samsung TV is to reset it. All you have to do is unplug the TV and wait 60 seconds. Press and hold the power button for 30 seconds while the TV is unplugged. Try turning it on, it works all the time.

In this article, I’ll discuss what the red light flashing on your Samsung TV mean and how to fix it. I’ll focus on covering the most straightforward fix and a bit of advanced troubleshooting. Still, be prepared to buy a new TV if nothing seems to work!

Samsung TVs are one of the most durable televisions you can ever own. It entered the electronic market in 1969 with its first product – black and white televisions.

In 2022, Samsung sold over 9 million units of QLED and Neo QLED TVs and also dominated the ultra-large TV market.

Still, no matter how durable and strong Samsung TVs are, there will come a point when it will break, or you might encounter issues such as the red light blinking on your TV. That could be an issue but don’t hurry to buy a new TV unless you try the tricks that I’ll be sharing below.

Let’s find out!

What Does Red Light on Samsung TV Mean?

The red light on Samsung TV usually means the TV is on standby and will turn off when the television is in use. A flashing red light on your Samsung TV may also indicate an HDMI glitch, bad electricity flow, or the TV need a reset.

In this case, the easiest solution would be to power cycle the TV, check for loose connection, or perform a soft reset.

Get my FREE guide to getting the most out of your SMART TV

PLUS, join today and I'll also send you my SMART HOME eBOOK, completely FREE.

    No spam, unsubscribe at any time.

    Just because the red light is blinking on your TV unit, it doesn’t mean that the television is a goner!

    Television on a counter
    Samsung television always has light indicators on its sides, just in a different location depending on the model you own.

    How do I reset my Samsung TV if it won’t turn on?

    Unplug the TV for 30 seconds. If the TV was plugged into a power board or surge protector, unplug it, and then plug it directly into an outlet that works.

    The red standby light on your TV indicates that it is receiving power and should turn on without any problems.

    How Do I Fix the Blinking Red Light on my Samsung TV?

    Replace the HDMI Cable

    A damaged HDMI cable can affect data transmission and signals between your external device and the TV.

    Replacing your TV’s HDMI cable can help solve the problem and eliminate the red light flashing on the TV. Without the HDMI cable, you won’t be able to watch on your TV not unless you are connected to a network or wi-fi.

    In the meantime you can try this hack: What You Should Know About the Samsung TV Remote App (Detailed) so you’ll be able to use your TV while you are still in the process of getting another remote.

    An HDMI cable
    If you’re not sure what an HDMI cable looks like, here’s it. You’ll find this connected to your TV.

    Reboot the TV

    Rebooting a device is the most straightforward fix that can also solve most of the minor issues, including bugs with the device. Hold the power button on your TV remote and wait until the TV finishes one cycle of ON and OFF.

    You should do it before trying any complicated solution or extensive troubleshooting method.

    How long is the life of a Samsung TV?

    Samsung TVs can last up to 4-7 years when used to their full capacity, such as being kept on maximum brightness and being turned on all the time.

    If none of these steps work, you can contact Samsung customer support. They will first run you through some standard troubleshooting methods that can help solve the issue.

    You can contact Samsung through their website or email. Samsung also offers a warranty of 1 year on its TVs. So if something of its part might malfunction, they’re obliged to fix it for you or even give you a new one to prevent you from waiting too long.

    A video on how to fix the red light blinking on Samsung TV

    Frequently Asked Questions (FAQs)

    How to fix a blinking red light on a Samsung TV remote?

    Blinking red light could also happen to the remote, not just the TV itself. This is due to stuck buttons caused by too much pressure when clicking. Find these stuck buttons, press and release them until they go back to their normal position.

    On the other hand, remote light issues on remote can also be because of dirt that gets stuck, thus affecting the performance and position of the buttons. You should clean your remote often too.

    Internet Connection IssuesConnect your TV to the nearest network
    Unstable Electricity FlowChange your power socket and or your HDMI cable
    Unreponsive RemoteUnresponsive Remote
    TV GlitchesPower Cycle or Reset
    Common Reasons for TV Malfunction and Their Solutions.

    Is it worth it to repair a TV?

    If the fix is too costly and your TV is already breaking down, buying a newer model is recommended. The key is to invest in a good and reliable brand that can withstand the test of time.

    If you find yourself repairing your TV a lot, it may be better to upgrade instead of shelling out money for repairs. Samsung TV might not be working well and turns on by itself read my other article here: Samsung TV Turns On By Itself (Guide to It!)

    Will Samsung replace my faulty TV?

    Samsung has a standard warranty period for customers to get their TVs fixed or replaced.

    The Samsung TV units and their components are covered by this warranty. However, you have to ensure that you purchased your Samsung TV from a licensed distributor.

    You also have to present evidence of the defect to Samsung personnel to claim the warranty.


    You now know that the red light flashing on your Samsung TV could be due to many reasons. Luckily there are a number of fixes you can try to solve this problem, such as rebooting the TV and replacing the HDMI cable to enable good electricity flow and solve the problem with receiving signal.

    Personally, I always check the power cord or HDMI cable first, whether it is damaged or if there are cracks present. And if it looks okay that’s the time that I’ll be trying to do the other hacks.

    If none of the fixes in this article work, try contacting Samsung support, and they’ll help resolve your issue. You might need to buy a new TV if the damage is too serious.

    Other Articles

    Never Miss A Thing!

    The latest smart home news and deals, straight to your inbox.

      No spam. Unsubscribe at any time.

      Skip to content