To operate your Samsung TV using a universal remote, you first need to program the correct remote code to initiate the connection. This will allow you to control the TV just as you would with the original remote.
Should the original remote for your Samsung TV cease functioning, a universal remote can serve as a replacement. Below is a compilation of typical Samsung Universal Remote Codes. Continue reading for additional details.
- 4-digit Samsung universal remote in codes
- 1663, 2065, 1305, 0644, 4086, 1859, 1840, 0178, 1423, 0606, 0037, 0714, 1842, 0715, 1681, 0109, 0361, 0556, 0698, 1637, 1235, 1249, 0208, 1506, 0090, 0150, 1060, 0072, 0482, 0092, 0264, 0519
- Samsung TV Universal Remote Codes One For All
- 0178, 0030, 0056, 0019, 0587, 0060, 0093, 105, 106, 104, 101, 109
- 5-Digit Samsung Universal Remote-Control Codes
- 11632, 10650, 10702, 10814, 10060, 12051, 10032, 10329, 10056, 11060, 10030, 10178, 10587, 10217, 10766, 13993, 10812, 10482, 10408, 11575
How to set up a universal remote for a Samsung TV
Remote controls for electronic equipment can be switched out for universal remote controls. Any home appliance, including a Smart TV, DVD player, Blu-ray player, air conditioner, and others, can be run by it.
With various remote controls, you may program Samsung TV remote codes to turn on or adjust the volume, among other features.
In order to set up your Samsung remote codes with a remote, you only need to choose the type of remote you have and follow the setup instructions for each type.
For information on Samsung Soundbar Universal Remote Codes, see this post. The steps that are listed below must be followed to set up the remote control.
- You must first select the “Menu button.”
- Following that, you must access the “Menu.”
- You must navigate the “System.”
- After that, go to “Device Manager.”
- The Universal Remote must be configured on your setup.
Manual Way to Set Up a Universal Remote for Samsung TV
- Ensure that the TV is on.
- On the remote, press the TV button.
- Hold down the Setup button while waiting for the TV light to flicker twice.
- You can obtain the code for your particular brand of remote in the next section.
- When the code is accurate, the LED will blink twice. If not, repeat the previous procedures until you find the correct one.
- Press the TV button once, followed by the Setup button, which you must hold down until the LED blinks twice.
After pairing your TV using one of these techniques, try controlling it to ensure all its features. If it still won’t work, read my article: Samsung Tv Manufacturer Warranty (Discussed), to learn if you might need to replace your TV.
How to find my TV code for the universal remote?
It’s in the product manual. But if you lose it, you’ll still be able to know what it is if you know the model of your TV, which you can verify on the serial number indicated at the back of the rear panel.
The following are the remote codes that might be compatible with your Samsung TV depending on the model:
| Samsung Universal Remote Codes | Codes |
|---|---|
| Samsung TV Universal Remote Codes One For All | 0178, 0030, 0056, 0019, 0587, 0060, 0093, 105, 106, 104, 101, 109 |
| 5-Digit Samsung Universal Remote Control Codes | 11632, 10650, 10702, 10814, 10060, 12051, 10032, 10329, 10056, 11060, 10030, 10178, 10587, 10217, 10766, 13993, 10812, 10482, 10408, 11575 |
| 4-Digit Samsung Universal Remote Control Codes | 1663, 2065, 1305, 0644, 4086, 1859, 1840, 0178, 1423, 0606, 0037, 0714, 1842, 0715, 1681, 0109, 0361, 0556, 0698, 1637, 1235, 1249, 0208, 1506, 0090, 0150, 1060, 0072, 0482, 0092, 0264, 0519, 0370, 0774, 0587, 0056 |
| Samsung TV codes for the GE universal remote | 0077, 0005, 0105, 0842, 0104, 0015, 0004, 0009, 0007, 0076, 0085, 0172, 0358, 0012, 0106, 0109, 0076, 0080 |
How to Set Up the Samsung Universal Remote Control Without Codes
All universal remote-control codes are scanned in the remote during the auto-search procedure.
To program the control, it scans one code at a time to determine the correct remote code that works with your remote. Observe the directions below:
- Turn on the smart device, such as “The TV,” that you want to control with the universal remote.
- To “turn on” a device, press and hold the TV, DVD, CBL, and OK/SEL buttons for three seconds. The device is prepared to program according to the LED light.
- Use the remote to select the “CH+” and “CH-” switches. On/off indications are displayed on the remote. Continuously press the “up” or “down” key until the device turns off.
- Click the “power” key to confirm the code. It should start up. If it does, try a different channel to make sure the remote is configured properly.
- To store the code, press the “device” button now. The device’s LED will flash twice to verify the code that was stored.
How to Set Up Your Samsung Remote Control Using Code Search
You can set your universal remote to search mode and look for the right key code if you are unable to find it at that time. The remote control is forced into search mode by a code in the instructions.
- “Turn The Device On” first.
- Hold down the “Setup” button for a moment.
- Enter the “9-9-1” (three-digit) code, after which you must continue to hold down the “Power Button” on the remote control while pressing the Channel up button until the device, in this case, your TV, “Turns Off.”
Finding your key code may take a little more time using the above method, but it’s very crucial. Your remote should function properly for all in-room functions once you have completed the aforementioned steps.
Frequently Asked Questions (FAQs)
What are the Samsung TV DirecTV remote codes?
The DirecTV remote codes for Samsung TVs are 54000 and 0101. Just in case, if in the future, this might not work try checking at DIRECTV website and see their updated DirecTV remote codes.
How to get Samsung TV to recognize the universal remote?
If by chance the universal remote won’t work despsite using the correct code, just press the Play button togerther with the Pause button for at least 5 seconds. Make sure there’s nothing in between your TV and remote, as big objects can blocked the ingrared signal causing the pairing uncessfull.
What is the Dish Remote Code for the Samsung TV Remote?
Answer: On the Dish Remote, click the home button, then choose Settings. To link the remote to the Samsung Smart TV and start controlling it, enter the number 0101.
Can Samsung remotes be replaced?
You can buy a replacement remote by purchasing the appropriate model at samsungparts.com.
You can also find more budget-friendly options like universal remotes on websites like Amazon. However, make sure that the universal remote will work for your Samsung TV model. Some universal remotes may not work for specific TV models.
How do I know if my Samsung remote is fully charged?
The recent Samsung remotes all have indicator lights that would flash green if it’s fully charged.
In contrast, you will know if your Samsung remote is running out of battery when it’s flashing red already. It will also flash red for remotes that are unpaired or disconnected.
Conclusion
I still advise using the universal remote from Samsung even though third-party models are crammed with capabilities and significantly improve your TV viewing experience.
To program the control, it scans one code at a time to determine the correct remote code that works with your remote. If you need more information you can read my other article here: Lost Samsung TV remote? (Here Are a Few Things You Can Try)
Lucky you! This thread is empty,
which means you've got dibs on the first comment.
Go for it!