Was this helpful?
Like Post Dislike Post
Table of Contents

    Resolving “No Signal” Error on TV with Cable Box Powered On

    Resolving “No Signal” Error on TV with Cable Box Powered On
    Table of Contents Show More

    If your television displays a “No Output” alert even though your cable box is activated, it may be caused by an issue with network reception. Furthermore, selecting an incorrect Input source could also result in this problem manifesting on your screen.
    Continue to investigate and experiment with the suggestions I have provided for you below!

    What does “No Signal” signify on TV when the cable box is active?

    If your TV is displaying a “No Signal” message and your cable box is on, it means that your TV is not receiving a signal from the cable box. This can be caused by a variety of factors, including:

    • A problem with the cable box itself
    • A loose or damaged cable connection
    • A problem with the TV’s input selection
    • A service outage from your cable provider

    Here are some troubleshooting tips to try to fix the “No Signal” message:

    1. Check the cable connections: Ensure that the cable connecting the cable box to the TV is securely plugged into both ends. If possible, try using a different cable.
    2. Check the TV’s input selection: Make sure that the TV is set to the correct input for the cable box. Most TVs have a button on the remote control that allows you to switch between inputs.
    3. Power reset the cable box: Turn off it, unplug it from the power outlet, and wait at least 30 seconds. Then, plug the cable box back in and turn it on.
    4. Contact your cable provider: If you have tried all of the above and are still getting a “No Signal” message, contact your cable provider for further assistance.

    It is also possible that the “No Signal” message is being caused by a service outage from your cable provider. To check for outages, you can visit your cable provider’s website or social media pages. You can also call your cable provider’s customer service line.

    If you are still having trouble getting a signal, you may need to have a technician from your cable provider come to your home to troubleshoot the issue.

    Why does my TV say No Signal when HDMI is plugged in?

    The No Signal error on your TV when HDMI is plugged in can be due to a handshake gone wrong.

    HDMI uses the encryption method called HDCP (High Bandwidth Digital Protection), preventing the signal from being rerouted somewhere else.

    As a result, it turns off for a bit to prevent shifting the signal somewhere else while performing key exchange between source devices such as your Roku player or game console. The process is called a handshake.

    When this error occurs, it doesn’t mean that you need to replace the electronics on your TV. All you have to do is unplug and replug the HDMI cable for the TV to work again.

    How do I get my TV to recognize HDMI Input?

    If your TV can’t recognize HDMI Input, here is what you should do:

    • Check the HDMI cable. Make sure there is no damage. Replace damaged HDMI with new one.
    • Find the best turn-on sequence for your devices. If you’re used to turning the TV first before the cable box, do a reverse sequence instead.
    • Try a different HDMI Input.
    • Check for firmware updates. Install updates on your TV.

     

    How do I test my cable TV signal?

    If you’re using an internet cable TV, you can use the coax cable tester to test the cable TV signal.

    All you have to do is turn off the device you’re testing and attach one end of the coaxial cable to the input of the testing device and the other end to the output.

    If the readout is close to zero ohms, the signal is good. On the other hand, if it is above zero ohms, then you need help.

    Summary

    The No Signal error on your TV screen is usually due to problems with the network reception. Check with your cable provider if there is an interference in your area. If there is, then you just have to wait for a bit until the signal is restored.

    In addition, it could also be due to extreme weather conditions. You’ll have to install a better satellite if this is your case.

    However, most of the time, you don’t have to change the electronics on your TV when the No Signal error appears on the screen. So, try simple troubleshooting before doing something more extreme.

    For more troubleshooting tips, check out this article.

    Other Articles

    Was this helpful?
    Like the post Dislike the post
    PREV
    NEXT

    Share this post

    Lucky you! This thread is empty,
    which means you've got dibs on the first comment.
    Go for it!

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Send feedback to automate your life

    Describe your feedback



      We appreciate you taking the time to share your feedback about this page with us.

      Whether it's praise for something good, or ideas to improve something that isn't quite right, we're excited to hear from you.

      Live Smart