Skip to Content

Troubleshooting Your Chromecast Remote: Simple Solutions to Get it Working Again

Troubleshooting Your Chromecast Remote: Simple Solutions to Get it Working Again

Have you been having trouble with your Chromecast remote lately? You’re not alone! Many Chromecast users have faced issues with their remotes at one point or another.

The good news is that most of these issues can be resolved quickly and easily, without having to spend a fortune on repairs or replacements. You can try repairing the remote by checking the batteries, restarting the device, factory resetting the device, and finally contacting support.

In this article, we’ll take you through some simple solutions that can help you troubleshoot your Chromecast remote and get it working again.

We’ll cover everything from checking your remote battery to using the Google Home app as a remote. So, read on to learn how to fix your Chromecast remote and get back to enjoying your favorite shows and movies!

Solutions to Chromecast Not Working Problem

1Check the battery level, replace the batteries
2Restart the Chromecast device
3Repair the remote
A table about the solutions to the Chromecast not working problem

Check Your Remote Battery

A universal remote
Check the batteries of your remote

One of the most common reasons for Chromecast remote issues is a dead or low battery. Before you start tinkering with other solutions, it’s a good idea to check your battery first.

To check your remote battery, you can follow these steps:

  1. On the remote’s rear, unlock the battery compartment.
  2. Remove the battery and inspect it for any damage, such as leaking or corrosion. If you see any damage, replace the battery with a new one.
  3. If the battery looks fine, you can use a battery tester or a multimeter to check its voltage. A good battery should have a voltage of 1.5 volts or higher.
  4. Put in new batteries if the voltage is low or the old ones are dead.

Once you’ve replaced the battery, try using the remote again. In most cases, this simple fix should solve your Chromecast remote issues. If not, you can move on to the next solution.

Restart the Chromecast Device

If checking the battery didn’t fix the issue, the next step is to restart your Chromecast device. This is a simple yet effective solution that can solve a variety of problems, including those related to the remote.

Here’s how to restart your Chromecast device:

  1. Disconnect the Chromecast device’s power cord from the outlet.
  2. Wait for at least 10-15 seconds.
  3. Plug the Chromecast device back in and wait for it to reboot.

Once the device has rebooted, try using the remote again to see if the issue has been resolved. This simple solution can often get your Chromecast remote working again.

chromecast and tv
Try restarting the Chromecast Device

Re-pair the Remote

The next solution is to re-pair your Chromecast remote with the device. This will help to establish a new connection between the remote and the device, and can often solve connectivity issues.

Here’s how to re-pair your Chromecast remote:

  • Hold down the button on the back of your Chromecast remote for at least 25 seconds.
  • Wait for the LED light on the remote to blink 3 times.
  • Hold down the button again until the LED light starts flashing quickly.
  • You should see a message on your TV screen saying “Chromecast Remote Connected.”
  • Once you see the message on your TV screen, try using the remote again to see if the issue has been resolved.
You can also use your phone to control your TV

Factory Reset

An explanation of how to execute a factory reset is provided below:

  1. Make sure your Chromecast is connected to a TV and a power source.
  2. Locate the small button on the back of your Chromecast device.
  3. Press and hold the button for at least 25 seconds, or until the solid light on your device begins flashing.
  4. Once the flashing light appears, release the button and wait for your Chromecast to restart.
  5. And that’s it – your Chromecast device has been factory reset!

Now, why might you need to factory reset your Chromecast in the first place? Well, sometimes software updates or glitches can cause issues with your device, such as connectivity problems or audio/visual errors.

In these cases, performing a factory reset can help to clear out any lingering bugs and get your Chromecast back in working order.

It’s important to note, however, that factory resetting your Chromecast will erase all of your device’s settings and data. This means you’ll need to set it up again from scratch, including connecting it to your Wi-Fi network and installing any necessary apps.

So before you go ahead with the reset, make sure you’re prepared to go through the setup process again.

If you’re experiencing persistent issues with your Chromecast that just won’t go away, a factory reset might be the solution you need. Just follow the steps outlined above and you’ll be back to streaming your favorite content in no time!

Use Google Home App

First off, let’s talk about what the Google Home app is. Essentially, it’s an all-in-one hub for managing your smart home devices, including Chromecast. With the app, you can set up and configure your Chromecast, as well as control what content is being streamed to your TV.

To get started, make sure your Chromecast device is set up and connected to the same Wi-Fi network as your mobile device. Then, follow these steps to set up the Google Home app as a remote:

  1. Download the Google Home app from the App Store or Google Play Store, if you haven’t already.
  2. Tap the “+” symbol in the top left corner of the app after opening it.
  3. Choose “New devices” under “Set up device.”
  4. To link your Chromecast to your Wi-Fi network, follow the on-screen instructions.
  5. Once your Chromecast is connected, tap on the device in the app and select “Remote control.”

Now that you have the app set up as a remote, you can use it to control your Chromecast in a variety of ways. Here are some examples:

  1. Cast videos, music, and other content directly from your mobile device to your TV.
  2. Adjust the volume, pause/play, and skip forward/backward on your Chromecast using the app’s playback controls.
  3. Search for new content to stream on your TV, including movies, TV shows, and music.
  4. Create speaker groups and sync your Chromecast with other smart speakers in your home.
A video on how to fix Chromecast remote

Contact Support

If you’ve tried all of the above solutions and your Chromecast remote is still not working, it may be time to contact support for further assistance.

You can reach out to Google support via their website, where you can find troubleshooting guides, chat with a support representative, or schedule a call with a technical expert.


Why Is My Chromecast Remote not Working?

There could be several reasons why your Chromecast remote isn’t working, such as:

  • Low or dead batteries
  • Interference from other electronic devices or wireless signals
  • Glitches with the Chromecast device itself

How Can I Check the Battery of My Chromecast Remote?

To check the battery of your Chromecast remote, remove the back cover and check for the battery’s level.

Alternatively, you can replace the batteries with fresh ones to see if that solves the issue.

How Do I Restart My Chromecast Device?

To restart your Chromecast device, simply unplug it from the power source for a few seconds, then plug it back in.

This can help to reset any glitches that may be affecting the remote.


  • Experiencing issues with your Chromecast remote can be frustrating, but there are several solutions available to get it working again. 
  • The first step is to check the batteries, as low or dead batteries can often be the culprit. If that doesn’t work, try restarting your Chromecast device or re-pairing the remote. 
  • In more serious cases, a factory reset may be necessary. Alternatively, the Google Home app can be a useful tool for controlling your Chromecast remotely. 
  • If all else fails, don’t hesitate to contact support for further assistance.
  • With these simple solutions, you can get your Chromecast remote up and running in no time, allowing you to enjoy all your favorite content on the big screen.

Related Articles

Online Security and Privacy

It’s never been more important to protect yourself online. Threats are everywhere, and scammers are getting smarter every day.

Whether you’re looking to improve your online security, enjoy more privacy, avoid others tracking you across the internet, or just want to use a streaming service from another country, a VPN can be very useful.

Here are some of the best options (affiliate links)

Skip to content