Summary: When your RCA TV refuses to turn on, the issue might stem from the power source, the remote controller, or a malfunction in the internal components. You can attempt corrections such as connecting the TV to another power socket, swapping out the remote’s batteries, or inspecting the internal components for any visible damage.
RCA TVs are renowned for their robustness. Knowing how to address typical problems like an unresponsive power function can assist in preserving and enhancing the performance and durability of your RCA TV.
Next, let’s explore how to repair an RCA TV that doesn’t power up!
Why won’t my RCA TV turn on?
Here are possible causes on why the RCA TV won’t turn on:
| Possible Cause | Explanation |
| blown power cord | A damaged or frayed power cord could be one reason why your RCA TV won’t turn on. |
| short circuit in your TV | If you force the TV to turn on, it can cause further damage. In some cases, the outcome may not be fixable. |
| remote control problems | If you’re using a defective remote, it won’t power the TV. |
| damaged fuse | An old and damaged fuse is a possible culprit on why your RCA TV is not turning on. |
| faulty surge protector | A faulty surge protector can stop the TV to work or even turn on. |
| HDMI cable issues | A damaged HDMI cable blocks the connection between the TV and the cable box (if you’re using one) which stops the RCA TV from turning on. |
| dust and debris | Dust and dirt can make the TV stop working. It can also cause static electricity causing damage to the TV. |
What do I do if my RCA TV won’t turn on?
Here’s what to do if RCA TV won’t turn on:
RCA tv won’t turn back on after brief blackout.
byu/scribbledoll intechsupport
Check if your wall socket is supplying enough power.
Reset the TV.
To reset RCA TV, simply unplug the TV from the power source and press the power button for 15 seconds. Wait for one to two minutes before plugging in the TV. Turn on the TV.
Replace remote batteries.
Take out the remote batteries and replace them with new ones. Make sure the remote is not on Standby Mode. Also, have a good line of sight with your TV to establish a good connection with the remote.
Swap out the HDMI cable.
Remove any HDMI connected to the TV. Also, clean both ends of the cable before plugging it in. Make sure they’re plugged in firmly into the port.
Check the power supply.
Check if your wall socket is supplying enough power. Plug in the TV to a different power source. Also, check the power cord for damage.
Check internal components.
Check the backlight, powerboard, and T-Con board for damage. You can call a technician for help if you’re unsure how to physically open the TV.
Call RCA TV Support.
Call RCA TV Support for technical help. If your TV is less than a year old, you can get it replaced under warranty.
Where is the reset button on RCA TV?
The reset button on the RCA TV can be located on the side or beneath the front panel.
Bear in mind that if you decided to hard reset the RCA TV, you’ll lose the stored password and apps and preferred settings will be wiped.
However, this will solve software-related issues, maybe that includes the issue of RCA TV not turning on. So, it’s worth a try resetting the RCA TV.
How to reset RCA TV?
Follow these steps to reset RCA TV:
- Unplug the TV from the power source.
- Press the reset button for 10 seconds.
- Wait for the TV to reboot.
The resetting methods on RCA TVs vary depending on the model that you have. The HD or DVC model involves a bit of work than simply turning off the device.
If you’re unsure what kind of RCA TV model you have, check the manual or call RCA TV support.
How do I fix my RCA TV when the screen goes black?
Here are ways to fix the black screen of death on RCA TV:
- Check the HDMI cable connection.
- Make sure the TV is using the correct Input.
- Soft reset or reboot the TV.
- Turn off Power Saver or Sleep Timer.
- Plug in the TV to a different power source.
- Check the TV’s internal components for damage.
How to turn on RCA TV without a remote or power button?
To turn on RCA TV without a remote, simply locate the power button and press it.
Additionally, you can potentially use the buttons on the TV to access the menu settings as well as control the volume.
Moreover, you can also use the PlayStation, Xbox, or Nintendo Switch if you don’t have a power button. These consoles can be used to turn on the RCA TV when they’re connected to the device.
How to tell if your RCA TVs power board is damaged?
If your RCA TV is on but without a picture, chances are, its power board is damaged.
Bad electric supply and dust can cause damage to the TV’s power board. In the long run, you’ll have a problem turning the RCA TV if the power board isn’t fixed right away.
Moreover, it’s also important to check the TV backlight and T-Con board for damage.
Conclusion
The RCA TV not turning on is a common issue that you might face. No worries as the TV can get fixed with simple troubleshooting.
Follow our troubleshooting hacks in this article and I assure you your RCA TV will turn on unless there is serious damage to its internal components.
Let us know how it goes for you!
Lucky you! This thread is empty,
which means you've got dibs on the first comment.
Go for it!