Master Reset: Effortlessly Restore Your Kwikset Smart Lock

To begin a reset on your Kwikset smart lock, locate the reset button on the rear of the unit. Press and maintain pressure on the reset button for 10 seconds until a beep sounds, indicating that the reset has successfully finished.

Kwikset operates as a subsidiary of Spectrum Brands Holding, Inc., headquartered in Orange County, California. Its recorded revenues amounted to $3.089 billion as of December 2022.

How do I reset my Kwikset door lock code?

Follow these steps to resetting the Kwikset door lock code:

1. Unlock and open the door.
2. Remove the battery pack.
3. Re-insert the battery pack while pressing the program button. The program button is located at the interior back panel of the lock.
4. Hold the program button for 30 seconds until you hear the beeping sound and the status LED flash red.
5. Keep pressing the program button until the LED indicator flashes green, and you hear two beeping sounds.
6. The Kwikset door lock has been reset and is ready to be set up again.
7. Test to see if the old door code is still working. If it is working, you should call your home security system provider to have the new code entered into the system.
8. Test the new door code a few times to teach the lock to recognize it.

How do I rekey my Kwikset SmartKey lock?

In case the Kwikset SmartKey lock isn’t working, here’s how to re-key it:

For the entire procedure, you’ll need the following:

Now, off to the actual procedure!

1. Remove the lock by unscrewing it from the door.
2. Remove the cylinder from the housing.
3. Remove the plug from the cylinder. You can use a small tool or any pin that fits on the keyhole. Hold on to the plug as some of its internal parts may come free during the removal process from the cylinder.
4. Look for the right wafer alignment and pull out the reset tab. It will take a few attempts.
5. Insert your new key.
6. Reassemble.

Just Bought a House – Anyone Know How to Reset this Pad?
byu/wayneofthrones inHome

As you can see, it’s not the end when you lose the original Kwikset smart key, as you can easily rekey it. As long as you meticulously follow the steps above, you don’t have to call a locksmith to do the job for you.

FAQs

How do I reset my Kwikset 913 lock code?

Here’s how to reset your Kwikset 913 lock code:

1. Open the door.
2. Take out the battery cover.
3. Press the program button just once.
4. Enter the new code.
5. Press the lock button.
6. You’ll hear a beep, and the LED light will flash green as an indication that you have successfully reset the lock code.

How do I reset my Kwikset 916 lock code?

This is the procedure for resetting the Kwikset 916 lock code:

1. Press and hold the program button. Wait for the checkmark symbol to illuminate.
2. Press the checkmark symbol once.
3. Enter the new lock code/master code.
4. Press Lock.
5. Re-enter the new lock code/master code.
6. Press Lock.

The check mark symbol will illuminate, and you’ll hear a beep when resetting is successful. You’ll see the “X” pattern flashing and hear three beeps when resetting is unsuccessful. If unsuccessful, repeat the process.

How do I reset a digital door lock?

There are two standard methods for resetting a digital door lock. The first method can be done through an app, and the second is by pressing the factory reset button on the back of the door lock.

Since locks are a great part of protecting properties from unauthorized access, they need to be considered in as many aspects as possible before claiming to be secure.

It is important that you check the manual of your digital door lock before performing any procedure. The manual should explain the right procedure along with the dos and don’ts.

Is a smart lock safer than a deadbolt?

Generally, smart locks offer more levels of security and precautions than your standard deadbolt.

Aside from being password-protected, some smart locks also have two-factor authentication, recording features, and other levels of precautions that can make you feel safer in your home.

However, in instances where you leave your smart lock not set, it would be no safer than your regular deadbolt.

Are smart locks easily hacked?

Smart locks, like any other wireless technology, can have security vulnerabilities.

However, smart lock brands are always innovating and equipping their models with the latest firmware. With two-factor authentication and remote access, homeowners can be assured that their smart locks won’t be hacked.

Still, you should always take precautionary measures by investing in the best home security equipment and choosing the best company that provides home security services.

Key Takeaways

If you need to reset your Kwikset smart lock, the process is incredibly easy and straightforward. Simply locate the reset button at the back of the lock and press it. This will initiate the reset process and allow you to start fresh with your lock.

As a friendly reminder, kindly ensure that the door is either unlocked or left open when resetting the smart lock to avoid the possibility of being locked out. It is always wise to prioritize safety and prevent any potential inconvenience or hassle.

Making the decision to invest in Kwikset door locks is a smart and practical choice. For the most optimal level of security, it is strongly advised that you consider replacing your current door locks with Kwikset. With their advanced technology and high-quality materials, Kwikset locks provide a reliable and trustworthy defense against potential intruders. Protecting your home and loved ones has never been easier with Kwikset.

I hope that the guidance provided to reset your Kwikset smart lock was helpful. Kindly keep me informed of any further issues or developments. Thank you for entrusting me to assist you.

Other Articles

• How to Recover Deleted Spotify Account?
• How To Fix Netflix Crashing (Easy Fix)
• Is TV Ma Worse Than R? (An In-Depth Look)