One of the initial steps you should take when troubleshooting any device is to reboot it. This technique is effective for many devices, Blink cameras included.
How to Reset a Blink Camera
To reset a Blink camera, press and hold the button on the side until the light on the module changes to red. The Blink Mini camera, which can operate independently of a Sync Campus, also features a reset button on its body.
Often, all it takes to bring your Internet router or Sync Module back online if your Blink camera is offline is a simple power cycle.
When troubleshooting, you can save a ton of time by knowing when to reset your Blink system and when to simply power cycle your router and module.
| How Can you Reset Blink Device? | Explanation |
|---|---|
| Reset your Blink camera | It is advised to use the reset button on the “Sync Module” to restart the entire system rather than just the camera. By doing that, you can make sure the system is set to its factory defaults and begin the setup process from scratch. |
| Should I Restart My Blink Camera Now that it’s Offline? | Power cycling the device usually fixes the Blink offline problem. Additionally, you will avoid having to spend time-consuming time reconfiguring your system. When you reset a device, factory settings are restored, and you must start over from scratch. |
| Resetting the Blink Sync Module | Find the reset button on the Sync Module (next to the USB port), press it, and keep it down until the light turns red. It typically takes 30 seconds. If you see both the blue light flashing and the green solid light, the device has been successfully reset. |
| Resetting Blink Mini Cameras | If your camera is having problems connecting to the Internet or when you want to connect it to a Sync Module, you can utilize the reset button. It can be challenging to locate the reset button on the Blink camera at times. All you need to do is inspect the device to find the reset button. |
Step-by-Step Guide to Restarting Your Blink Device
When connecting to and using the network, Blink cameras use the Sync Module as a hub. The Sync Module gadget is used by camera models such as the Blink Indoor, Outdoor, XT, and XT2 cameras to connect all of them to the internet.
It is advised to use the reset button on the Sync Module to restart the entire system rather than just the camera. By doing that, you can make sure the system is set to its factory defaults and begin the setup process from scratch.
If you need a visual on how to restart your device, watch the video below.
whether the Blink camera is functioning correctly.
How to Reset The Sync Module?
If a power cycle doesn’t fix the problem, proceeding to the next step should work. You can easily restart your Blink camera system by simply resetting the Sync Module component.
A physical reset button is included on the rear of the Sync Module. Only after trying a power cycle should you use this button to put your Sync Module into setup mode (unplug and plug-in the power cord). Your system will be offline if you click the Reset option until you change the settings on your Sync Module.
If you see both the blue light flashing and the green solid light, the device has been successfully reset.
Helpful Hint: For optimal performance, conduct a reset both before and while the sync module is connected. In order to reset the device, use a paperclip or a small screwdriver
The Sync Module will enter factory mode after being reset. All of the cameras will be offline as a result, and you will need to reinstall them. In essence, the system must be reconfigured.
You must uninstall your Sync Module from the Blink app and reinstall it in order to be able to see your cameras once more.
To remove and then reinstall your Sync Module, follow these steps:
- Click the? Symbol after launching the Blink app.
- Delete the “Sync Module” option.
- Tap “Delete” after scanning or entering the module’s serial number.
- To add the system, return to the home screen and click the plus sign.
- “Blink wireless camera system” should be selected.
- Repeat the scan or entry of the module’s serial number.
- Tap “Discover Device” after choosing your Blink system.
- After selecting your Blink system, tap “Discover Device.”
Resetting Blink Mini Cameras
Each Blink camera that functions independently of a Sync Module can be reset. Simply look for the reset button on the camera’s bottom to get started.
It will return to factory settings if you press and hold it for 30 seconds. Additionally, if your camera is having problems connecting to the Internet or when you want to connect it to a Sync Module, you can utilize the reset button.
It can be challenging to locate the reset button on the Blink camera at times. All you need to do is inspect the device to find the reset button.
For instance, the Blink Mini Camera’s reset button can be found on the bottom of the device, next to the area where the stand fastens, and on the front side of the device. The word “reset” is inscribed next to the button on the camera.
On Blink XT and XT2 Cameras, the reset button is found in the battery compartment. The serial number sticker and reset button are both located at the top. The reset button is tucked away inside a hole in the plastic shell.
On Blink Indoor and Outdoor Cameras, the reset button is found in the battery compartment. The reset button is concealed in the hole next to the right-side battery, and you must insert a paper clip to access it.
Frequently Asked Questions (FAQs)
How many Blink cameras can I connect to one Sync Module?
The number of cameras that can be connected to a single Sync Module depends on the model. Some models support up to 10 cameras, while others support more. Check the specifications for your specific Sync Module.
How Do I Remotely Reset My Blink Camera?
You may remotely reset the System and Cameras using the Blink App. The Sync Module, on the other hand, needs to be physically reset.
Conclusion
- Although it is easy to reset your Blink camera system, doing so all the time is not good for your device.
- If the camera is offline, you should try restarting your camera, internet-connected devices, and Sync Module in that order.
- If that doesn’t work, you can try pushing the reset button on the side of the device to restart the Sync Module.
- Always attempt power cycling before resetting because doing so necessitates deleting the Sync Module in the Blink app and installing it again.
- You can reset the camera using the reset button on the bottom if you have a Blink Mini camera without a Sync Module.
- Finally, call Blink support if you’re still having issues with your camera despite following the steps above.
![How Do I Connect My Eufy Doorbell to My Home Assistant? [Guide]](https://automatelife.net/wp-content/uploads/2023/05/Eufy-3.jpg "How Do I Connect My Eufy Doorbell to My Home Assistant? [Guide]")
Lucky you! This thread is empty,
which means you've got dibs on the first comment.
Go for it!