Skip to Content

How to Fix the Error Code 110 on Your Samsung TV? (Explained)

How to Fix the Error Code 110 on Your Samsung TV? (Explained)

The televisions produced by Samsung are often regarded as among the most desired available. The most recent models are ultra-high definition (UHD) capable, and many of them also include smart TV capabilities.

On the other hand, if you continue to see the error code 110 on your television, it’s possible that you won’t be able to use some of these functions.

In the event that you see Error Code 110 on your Samsung TV, it indicates that your device is unable to successfully connect to the internet.

You could try resetting your network connection to see if it helps repair the issue. On the other hand, in the event that this does not work, there are other actions that you may do to remedy the situation.

In the following paragraphs, we will go over a few solutions that might assist you in fixing this problem and restoring normal operation to your TV.

What to doBrief Information
Fixing Error Code 110Trying to fix your TV by resetting or restarting it. Reducing the security of your network by disabling the firewall. Modifying the Network Protocol Address (IPv4 or IPv6) or Other Network Parameters Manual.

The firmware on your TV may be updated automatically or manually, depending on your preference.
Make Any Necessary Changes to Your IP or Network Settings ManuallyIn order for your TV to maintain a connection to the internet, you may at times be required to manually change the settings on your device.
Content Overview

Fixing Error Code 110 and How To Do It

You may be able to correct the issue by going into the network settings on your TV and then reestablishing a connection to the Wi-Fi network that you want to use.

On the other hand, if there is a more fundamental problem, the TV can refuse to reconnect. In the event that this takes place, you will need to go a bit further to get to the bottom of the issue and find a solution.

You may attempt a few different things, each one of which has a chance of assisting you in removing the problem code. These are the following:

  • Resetting or restarting your television device
  • Turning down the firewall that protects your network
  • Changing your IP settings or network configuration manually
  • You may choose to update your TV’s firmware either automatically or manually.

In the following paragraphs, we will go through each of these strategies in further depth.

a remote being pointed at a TV screen
The Samsung Smart TV is compatible with voice controls via services like Bixby, Alexa, and Google Assistant

Restart or Reset Your Television

If re-establishing a connection to your Wi-Fi network does not solve the problem, the next thing you should do is reset or restart your television.

It is common knowledge that restarting a device will solve any issues with the cache or settings that are stopping you from connecting to a wireless network.

You may try turning the TV off and on again by depressing and holding the power button on the remote control until the TV does so.

Check to see whether the code continues to appear when you turn the device back on. If that’s the case, you could want to disconnect your TV for a few minutes.

After then, reconnect it and see whether or not anything has changed. If this method does not work, you will need to go on to the next one.

Turn Down The Firewall That Protects Your Network

It’s possible that your Samsung TV can’t connect to your Wi-Fi network because you have a firewall installed on your network.

You may want to try disabling your firewall or adjusting its settings. The next step is to check to see whether you are able to connect to the internet.

It’s possible that you’ll need to enter your password once more. If you are still seeing the issue after completing this, go to the next instruction.

A TV screen with multiple apps
Amazing models and they’re not even expensive

Make Any Necessary Changes to Your IP or Network Settings Manually

In order for your TV to maintain a connection to the internet, you may at times be required to manually change the settings on your device.

It’s possible that when you try to rejoin your Wi-Fi network, your device may ask you to alter the settings for either your network or your IP address. You are going to need to perform some research in order to do this.

You will be able to get the information you want from the settings on your mobile smartphone if both devices are linked to the same Wi-Fi network.

With Android

On Android phones, the following is how you may locate what you are looking for:

  • Launch the Settings app on your device, then choose “Wi-Fi Settings.”
  • Choose the network you want to manage, then click the “Manage Network Settings” button.
  • After pressing “Show Advanced Options,” choose “IP Settings” from the menu that appears.
  • Make sure that your IP settings are set to “Static.” Your network’s specifics will be viewable to you as a result of doing this.

Take down on paper the IP address as well as the number of the DNS server that is shown on your phone.
Using an iPhone

You may also get this information via the settings on your iPhone if you own one of them. This is how you may locate it:

  • Launch the Settings app, then choose “Wi-Fi” from the menu that appears.
  • Once you have navigated to the Wi-Fi settings page, choose the blue I button that is located next to the network that you are currently using.
  • Continue scrolling down until your IP address appears. Take careful note of this address.
  • Scroll down a little farther and click the “Configure DNS” button to get the number of your DNS server.
  • You may find the number of the DNS server at the very bottom of this page. Also, jot this figure down in your notebook.
  • After you have both of these addresses, go to the Network Settings page on your Samsung TV and from there, browse to the IP Settings section. You will need to input the information that you have written down after selecting “Manual Configuration” for both your IP and DNS settings. To complete, click the “Ok” button.

There is one more thing you may do in the unlikely event that you are still unable to connect your TV to the internet after attempting this.

Make Sure Your TV’s Firmware Is Up to Date

Outdated versions of the firmware might sometimes be the source of problems with a network connection.

In the event that nothing else works, check to see if there are any available upgrades to the device’s firmware.

If that is the case, download and run the update. In order to stop this issue from happening again in the future, you should probably enable automatic updates.

Samsung Smart TV
Although not perfect, their intelligent traits are commendable. Most of the time, they may be used for a variety of purposes.

Frequently Asked Questions

Q: How Long Do You Typically Get Out Of a Samsung Television?

Ans: The typical lifetime of an LED is 100,000 hours, which is equivalent to around 10 years, and most people believe that this is how long their display will continue to function.

However, it’s not quite as straightforward as that.

Q: What Makes Samsung TV Stand Out From The Competition?

Ans: You are able to utilize voice commands with the Samsung Smart TV, whether you want to use Bixby or not. Choose the one that makes you feel the most at ease, and then simply utter the words.

You are provided with solutions, you are able to complete the tasks at hand, and you achieve a new degree of simplicity and convenience.

The availability of this service may differ depending on the area and language.

Q: What Model of Television From Samsung Should You Get?

Ans: We found that the Samsung S95B OLED was the most impressive of all of Samsung’s televisions. It is the first OLED TV that Samsung has produced in a long time and a new addition to the TV range that Samsung will release in 2022.

It is a little different from the OLED TVs that LG and Sony have introduced in recent years since it combines the technology that is already in place for OLED displays with the Quantum Dot color filter technology that Samsung has developed.

A youtube video for further clarification

Conclusion

  • Error Code 110 indicates that your device is unable to successfully connect to the internet. You could try resetting your network connection to see if it helps repair the issue.
  • If re-establishing a connection to your Wi-Fi network does not solve the problem, the next thing you should do is reset or restart your television.
  • It’s possible that your Samsung TV can’t connect to your Wi-Fi network because you have a firewall installed. You may want to try disabling your firewall or adjusting its settings.
  • In order for your TV to maintain a connection to the internet, you may need to manually change the settings on your device.
  • If you’re having problems connecting to the internet on your Samsung TV, here’s how to do it. Use the Wi-Fi settings on your TV to determine what kind of network connection you are using.
  • Make sure your TV’s firmware is up to date and enable automatic updates to keep it up-to-date.

Other Articles