More than often, your devices run into errors, and every error means something, which is why it should be easy to fix. If you talk about the No Command error that pops up when you turn on your Oculus Quest 2, there’s a simple and easy fix.
First of all, you should know why this error occurs. Well, No Command error occurs when multiple buttons on your headset are stuck, so what you need to do is turn off your Oculus Quest 2, and press each available button to make sure none of them lingers anymore.
Now, this error may occur repeatedly because of some reasons which are discussed below, so keep on reading.
By continuing to use this website you agree to our Terms of Use. If you don't agree to our Terms, you are not allowed to continue using this website.
What Is Causing No Command Error In My Oculus Quest 2?
You should know by now that every error occurs for a reason; even a small mishap can cause an error, and the No Command error that is occurring in your Oculus Quest 2 is probably because you press the buttons firmly, which makes them stuck.
In order to fix this error, all you have to do is power off your device and press all the buttons a few times to make sure none of them are stuck.
In addition, the buttons on your Oculus Quest 2 get stuck for a couple of reasons, but the most common reason has to be dust or debris, which gets underneath the buttons, so when you press those buttons tightly the buttons likely get stuck.
Pressing them firmly might also dislodge them, but you need to clean them to make sure this error never occurs again.
No Command could pop up when you’re in the middle of using the headset, and as the only way to fix it is by turning them off and pressing every button, it might take time, and your experience will certainly be disrupted.
Image Credit : Reddit
How Can You Fix The No Command Error By Pressing The Buttons On Oculus Quest 2?
Here’s how you can potentially fix the “No Command” error on your Oculus Quest 2 by pressing the buttons:
1. Power Off Completely:
- Ensure your Quest 2 is fully powered off. Press and hold the power button for about 10 seconds until it shuts down.
2. Activate Buttons:
- With the device off, firmly press and release each button multiple times:
- Volume up
- Volume down
- Power button
- Proximity sensor (located between the lenses, gently wipe it with a microfiber cloth)
3. Address Stuck Buttons:
- This process aims to dislodge any potential debris or address stuck buttons that might be triggering the error.
- Be firm but avoid excessive force that could damage the buttons.
4. Reboot:
- Once you’ve pressed all the buttons, press and hold the power button for a few seconds to initiate a reboot.
5. Retry Recovery Menu:
- If the error persists, attempt accessing the recovery menu again by holding the power and volume down button simultaneously for about 30 seconds.
Extra Advice:
- Charge Fully: Before attempting these instructions, make sure your Quest 2 has sufficient battery life.
- Clean Buttons: Use a microfiber cloth to wipe away any dust or dirt from the buttons and the surrounding region.
- Factory Reset (Last Resort): Try executing a factory reset from the Oculus app on your phone if the error continues. However, doing so will remove all of your device’s data.
How To Factory Reset Oculus (Meta) Quest 2 When You Are Using Headset?
It’s possible that the fix discussed above didn’t work, but not to worry because there are some other fixes that can solve your issue of the “No Command” error in your Oculus Quest 2 headset.
All you need to do is master reset your Oculus Quest 2. This way, everything will be deleted including any downloaded games or any content from the headset; your device will basically be as good as a new device.
Nevertheless, if you don’t want to lose everything, like the games you downloaded, you should enable Cloud Backup of your Oculus Quest 2.
Here’s how you enable the “Cloud Backup” feature on your Oculus Quest 2:
- First, you need to put your headset on and hover over the clock, which you’ll find on the left-hand side.
- Go to Settings.
- Find the System and click on it.
- There you’ll find Backup.
- Make sure that “Cloud Backup” is enabled.
Oculus Quest 2 Factory Reset Process Using Your Headset
I have explained the process of factory reset step by step below, so make sure you follow them in order to avoid any mishaps.
Step 1: First, you must confirm that your headset is turned off; then, you need to press and hold the power button as well as the volume down button; hold these two buttons until you see your Oculus Quest 2 power on.
Step 2: Now that it’s on, you should see “USB Update Mode” on the screen. Press and toggle the volume down button until you land on “Factory reset“, from there, you need to press the power button to select it.
Step 3: Last but not least, you need to press again and toggle the volume down button until it lands on “Yes, erase and factory reset”, to select it, you need to press the power button.
Following a factory reset, users will need to reconnect their Oculus Quest 2 to a Wi-Fi network. This includes entering the network credentials (such as the SSID and password) to regain internet connectivity.
How Can You Factory Reset Oculus (Meta) Quest 2 When You Are Using A Smartphone?
Now, if you want to make it easy for you to factory reset your Quest 2, you should use your smartphone.
Here’s the process of factory resetting using your phone step by step:
- Download the Meta Quest 2 app on your phone from the App Store or Play Store (Depending on the type of your device).
- Open the app and log in to your account.
- Then go to Settings which you’ll find at the bottom right-hand corner.
- You then have to select Oculus Quest 2, which will connect your device to your phone.
- Below you’ll see “More Setting”, click on it.
- Then it’ll show you a bunch of options in which you’ll also see “Factory Reset”, click on it and your Quest to will be reset.
After a factory reset, users will need to reinstall all the applications and games they had previously downloaded on the Oculus Quest 2. This can be done through the Oculus Store or by sideloading apps if desired.
How Can You Factory Reset Oculus (Meta) Quest 2 When Using a Laptop Device?
While you can factory reset using your headset, you can also use a laptop; follow the steps below carefully:
- On your laptop, open the browser and go to: https://secure.oculus.com/my/devices/ and log in to your account.
- Now select the name of your device.
- You’ll see “Delete Device Data”; click on that.
- It’ll ask for verification, so make sure to complete it to confirm your identity.
As the process is completed, your Quest 2 will disappear from the list, and it’ll be factory reset the next time you turn it on.
Mind you that if you don’t see the option of “Delete Device Data,” it’s likely that your Quest 2 software version may not support this way of factory reset.
You can also check out this video to see the process step-by-step:
Here’s a quick summary of all three methods to factory reset your Quest 2:
| Fix | Method |
| Using Headset | Turn off your Quest 2. Press and hold the power button and volume down button. You should see “USB Update Mode” on the screen. Press and toggle the volume down button and press the power button to select “Factory reset”. Again press and toggle the volume down button until it lands on “Yes, erase and factory reset”. Now press the power button to select it. |
| Using A Laptop | Turn off your Quest 2. Press and hold the power button and volume down button. You should see “USB Update Mode” on the screen. Press and toggle the volume down button and press the power button to select “Factory reset.” Again press and toggle the volume down button until it lands on “Yes, erase and factory reset”. Now press the power button to select it. |
| Using A Phone | On your laptop, browse https://secure.oculus.com/my/devices/. Login to your account. Select the name of your device. Click on “Delete Device Data”. Complete the verification, and you’re done. |
If the Oculus Quest 2 was in developer mode prior to the factory reset, users may need to re-enable this mode after the reset if they wish to continue using it for development purposes.
Frequently Asked Questions
What happens if my Oculus Quest 2 is factory reset?
Your Oculus account is linked to all of your downloads and purchases, not your headset. You merely need to re-download your games after the headset is set back up, even if game data can be lost during the factory reset.
My Oculus won’t switch on; why?
Consider utilizing an alternative power source, like a separate power outlet. A alternative charging cable would be useful. Check to see if your headset’s boot menu is accessible: Hold down the headset’s power and volume (-) buttons at the same time until the boot screen loads.
How can I speed up Quest 2’s charging?
While playing, don’t charge. The headset’s battery may be impacted by this and charge more slowly. It’s possible that the battery in your headset is overheated and needs to cool before charging. Check to see if there is any damage to your charging port by plugging in your charger and leaving it there to observe any changes.
Final Thoughts
- Errors occur for several reasons, and there’s a specific error for an issue. The “No Command” error in your Quest 2 occurs when multiple buttons on your headset are stuck.
- You can fix this error by merely pressing every button on your headset.
- However, this fix may not work for everyone, so you need to factory reset your device, which can be done using your headset, laptop, and your phone.
- Factory reset will delete all the games you have downloaded, so to save them you need to enable the “Cloud Backup”.
Other Articles
- How To Reset Your Samsung TV To Factory Defaults? – With Or Without The Remote!
- What Is The Expected Lifespan Of A Samsung Television In Years?
- How To Clean Samsung TV Screen? (Without Causing Damage)