Skip to Content

Sneak Past Ring Doorbell with These Foolproof Methods

Sneak Past Ring Doorbell with These Foolproof Methods

You can sneak past the Ring Doorbell if you disable the motion sensor or put an object in front of the camera to trigger the motion detector.

I guess the biggest question here is… why would you want to sneak past the Ring Doorbell?

In this article, I’ll share some safe methods on how to sneak past the Ring Doorbell. Bear in mind, the device has a super-sensitive motion detection capability – might be hard to get past the Ring Doorbell, I must say.

Anyway, it’s worth sharing some tricks that I have discovered online. So, keep reading!

By continuing to use this website you agree to our Terms of Use. If you don't agree to our Terms, you are not allowed to continue using this website.

About the Ring Doorbell

The Ring Doorbell is a smart device featuring camera, microphone, and motion sensors. It records and alerts you when someone is outside the door which also functions as a home security device. In other words, it alerts you when motion is detected or when the doorbell is pressed.

The Ring company was founded by Jamie Siminoff in 2013 as a crowdfunded startup Doorbot. It appeared on the reality TV show Shark Tank seeking a $700,000 investment in the company but it was declined.

At present, Ring is owned by Amazon making $13.8 billion in revenue.

Learn more about Ring Doorbell in this video!

All About Ring Video Doorbell

Can someone bypass a Ring Doorbell?

Yes, it’s possible to bypass the Ring Doorbell.

There are simple hacks that you can try to trick the Ring Doorbell into not detecting any motion. However, it might be a long shot as the Ring Doorbells are designed with highly sensitive sensors.

Personally, I disagree with doing such a thing as it might cause technical issues which can potentially expose your home to security threats.

How do you go undetected on a Ring Doorbell?

If you want to go undetected on a Ring Doorbell, turn off Motion Detection.

To turn off Motion Detection, follow these steps:

  1. Launch the Ring app.
  2. Tap the three lines on the left side of the dashboard.
  3. Tap Devices.
  4. Select your Ring device.
  5. Disable Motion Detection.
  6. You’ll get a notification asking you to confirm disabling Motion Detection. Confirm by tapping Stop Recording.

Besides, turning off Motion Detection, you can also try the following methods:

MethodsExplanation
Cover the Ring camera. Use an object to cover the Ring camera. You can use a piece of tape or a plastic bag to cover it. However, when not done appropriately, it could still trigger the sensor.
Cut the power to the camera. Disconnect the camera on the doorbell. Be careful not to damage the wires. As a fair warning, you might end up losing the warranty on your Ring device if you decided to open the Ring device.
Turn off Motion Zones. With the Motion Zones disabled, certain areas where the camera is focused are also disabled. Know these angles and you’ll be able to sneak past the Ring Doorbell.
Other Ways to Sneak Past Ring Doorbell

How do I turn off my Ring Doorbell secretly?

If you want to turn off the Ring Doorbell secretly, simply go to the Ring app and turn off the camera.

Here’s how to disable the camera using the Ring app:

  1. Launch the Ring app.
  2. Tap on Devices.
  3. Select the device you want to disable the camera.
  4. Tap on the camera icon.
  5. Toggle the camera to switch it off option.

Why didn’t my Ring Doorbell detect me?

The most common reasons why the Ring Doorbell didn’t detect any motion can be due to deactivated Motion Zones and Motion Detection.

Make sure the Motion Sensity settings on your Ring device are set to avoid any malfunction and to ensure that your home is fully protected.

Note: Check if Motion Detection is disabled at the time when the Ring Doorbell wasn’t able to detect you.

Does Ring only record when motion is detected?

Yes, Ring only records when motion is detected in a pre-determined zone.

In addition, it will also record when someone presses the doorbell. So, do not expect your Ring device to record 24/7.

The good news is that you can watch the live feed on your Ring camera using the Ring Protect subscription.

How do hackers hack Ring cameras?

According to some hacking forums, there is a dedicated software a hacker can use to spy on Ring cameras.

A “Ring Video Doorbell Config” is apparently used as a device software that can hack usernames and passwords and use them to log in to the Ring account. This config software also claims to work with Facebook, Uber, and other online services.

In that sense, Ring strongly encourages its customers to enable two-factor authentication on their Ring accounts.

In Summary

There are several ways to sneak past the Ring Doorbell, such as disabling some features, including camera and Motion Sensitivity. You can also cover the camera with tape or a piece of plastic to avoid detecting motion.

However, it’s not highly suggested that you keep on doing tricks to the Ring Doorbell to avoid corrupting its system. Besides, it also puts your home at risk of security threats.

Nevertheless, if you decide to experiment with the tricks mentioned above, please make sure to reset your Ring device and do not forget to set it back to the right settings.

If your Ring Doorbell starts to malfunction, check this article for some quick fixes to try!

Related Articles

Click here to view the Visual Story Version of this Article.

Skip to content