Make sure the system’s cables aren’t damaged or loose to fix the DirecTV internet connection not found error. Try power cycling the router and TV.
After that, test the connection choice and reset the router to fix any issues.
By continuing to use this website you agree to our Terms of Use. If you don't agree to our Terms, you are not allowed to continue using this website.
What are the causes of the DIRECTV not connecting to the Internet?
On DirecTV, an internet connection Not Found error can be caused by a number of different things. The most typical ones include the following:
1. A source of incorrect input
One common cause of DIRECTV not connecting to the internet is incorrect input settings. If you are using a device such as a Smart TV or a streaming box to access DIRECTV, you may need to check that the input settings are correct. If the settings are incorrect, it can cause the device to not connect to the internet, which can prevent you from accessing DIRECTV.
The correlation between the theory and measurements was extremely good up to -30 dB sidelobe levels. The cross-polar correlation was good and obtained by properly modeling the cross-pol of the feed.
To fix this issue, you should check the input settings on your device and make sure that they are set correctly. This may involve changing the input source, selecting the correct input option, or adjusting the network settings on your device.
2. Issue with Satellite Reception
Another possible cause of DIRECTV not connecting to the internet is an issue with satellite reception. If your satellite dish is not properly aligned or there are obstructions in the way, it can prevent the signal from reaching your receiver, which can cause problems with your internet connection.
To fix this issue, you may need to adjust your satellite dish or remove any obstructions that are blocking the signal. You may also need to contact DIRECTV customer support to troubleshoot the issue and make any necessary repairs or adjustments.
Image Credit: Reddit
3. Broken cables
Broken or damaged cables can also cause DIRECTV to not connect to the internet. If the cables connecting your receiver to your modem or router are damaged or not properly connected, it can prevent your receiver from connecting to the internet.
To fix this issue, you should check all of the cables connecting your receiver to your modem or router and make sure that they are properly connected and not damaged. If you find any damaged cables, you may need to replace them to restore your internet connection.
4. Problems with Routers
Problems with your router can also cause DIRECTV to not connect to the internet. If your router is not properly configured or there are issues with the firmware or software, it can prevent your receiver from connecting to the internet.
To fix this issue, you should check the configuration settings on your router and make sure that they are set up correctly. You may also need to update the firmware or software on your router or contact your internet service provider for assistance.
5. Verify TV Input
We have a good idea of where to begin to resolve the issue now that we are aware of the factors that can result in the DirecTV internet connection error.
Checking the input source is the first thing you need to do. Press either the input or source buttons on the TV remote control.
You will then be taken to a menu with all of the options for input displayed. To determine where the DirecTV receiver is connected, scroll through the various modes and select the appropriate option.
6. Make Sure You Have the Right Satellite Dish:
The error may also occur if you do not select the appropriate satellite dish. Using the DirecTV device’s satellite settings, you can easily resolve this issue. To integrate the correct satellite, you can repeat the entire satellite setup procedure.
What you need to do is as follows:
| Step 1 | Use the remote control to select Menu. |
| Step 2 | Choose Settings from the available choices. |
| Step 3 | Select Satellite from the submenu. |
| Step 4 | Pick the Repeat Satellite Configuration. |
| Step 5 | Press the remote’s Dash button |
| Step 6 | Choose the kind of dish. |
| Step 7 | Select a Method |
| Step 8 | Continue to hit |
The completion of this procedure might take a few minutes.
How to connect DirecTV to your Internet?
Getting your DirecTV box connected to your Wi-Fi network may necessitate some effort and troubleshooting. You can try a few different approaches, including:
Reset your network by hand or automatically.
The problem could be as minor as a router error. Restarting your router will reset all of the drivers, which frequently resolves connectivity issues.
Make sure that no other devices in your home are experiencing the same problems connecting to the network before moving on to the next step.
Resetting your router may be all that’s required to resolve the issue in this case. To turn off your router, press the power button, then wait anywhere from 30 seconds to 1 minute before turning it back on. After that, see if you can connect.
Restart your internet connection manually or automatically.
If none of the aforementioned solutions work, the problem most likely lies with your DirecTV box rather than your router. Try resetting your internet connection from the Settings menu in this case.
Reset Your Wi-Fi Connection Automatically
Resetting your DirecTV box’s Wi-Fi connection doesn’t require you to enter your Wi-Fi password.
WPS must, however, be enabled on your router. Do this first, then perform the following actions:
- Select “Settings” by pressing the Menu button on your DirecTV remote. Select “Network Setup” now.
- Click on “Restore Defaults” if your box was previously connected to the network but has since lost connection.
- Press “Connect Now” next.
- Select “Continue” followed by “Push Button Set Up” when the new screen appears.
- To activate WPS, head to your router. Your DirecTV device will automatically connect to the router after a brief delay.
Contact Customer Support
If none of the aforementioned methods helped, the problem most likely stems from a hardware issue that is interfering with the internet connection.
Calling customer service or the DirecTV technical support team is the best course of action.
They will assist you in identifying the real problem and either replace the entire system for you or dispatch a team to address the issue.
FAQs
How to reset my DIRECTV remote?
When the remote light flashes three times, press the mute and select buttons to reset the remote.
How do I reset my wireless bridge for DIRECTV?
Press and hold the red reset button, which can be found close to the access card, for a few seconds.
Is internet access required for my DIRECTV receiver?
DirecTV doesn’t require an internet connection to stream media.
Conclusion
- You can carry out a straightforward wire test on your own to determine whether your router is defective or whether there is a problem with the system’s wiring.
- On top of the power cable, you can connect the incoming satellite with a wire splitter.
- If this does not function, the cables are defective.
- By selecting the Test Internet Connection option from the settings menu, you can also test the network’s viability.
- An error message stating “There Is A Problem With The Connection Status” will be displayed if there is a problem with the internet.
- If nothing that is mentioned above works, you can call customer support to guide you and resolve your issue.
Related Articles
Is Internet Required With ADT? (The Truth)
AT&T Internet Equipment Fee (Why It’s Charged)
Resetting Your Bose Portable Home Speaker: A Step-by-Step Guide