In many modern homes, security cameras have become standard equipment. When you’re away from home. Blink security cameras provide you peace of mind, whether you want to monitor things while you’re on vacation or at work.
Blink offers cost-effective and sophisticated home security systems and cameras to help you keep an eye on your house. Blink provides high-tech video systems for both indoor and outdoor security.
These cameras are portable, allowing you to install them wherever and monitor your house from afar. Blink Cameras are extremely reliable since they are among the best security cameras available that do not require a monthly fee.
Content of this article:
|How To Fix If Blink Cameras Are Not Working?||This article will go through 9 simple ways to fix your blink camera.|
|Fix 1: Check The LED Indicator Light||LED indicator light on the Blink camera can help you troubleshoot your problem.|
|Fix 2: Power Cycle Blink Sync Module||Restarting your Sync Module is the first thing you should try after troubleshooting your problem.|
|Fix 3: Ensure That the Blink Sync Module Is Not Too Far From the Router||Avoid putting the router too far from the Blink sync module as doing so makes it more difficult to establish Wi-Fi connectivity.|
|Fix 4: Power Cycle your router||If your router frequently fails to connect the sync module to the internet. You should power cycle your router.|
|Fix 5: Contact your internet service provider||It is time to call your internet provider if you notice that your internet is not working and you have tried everything to restore your internet connection but it is still not working.|
|Fix 6: Factory Reset The Blink Camera||A factory reset will be your best option to address the problem if your internet is working normally but your blink camera is frequently losing connection.|
|Fix 7: Use Another Power Source||Remove the batteries from the camera and attach them to a USB cable and USB power adapter to test a different power source.|
|Fix 8: look into the RouteThis Help Guide||Blink has provided a thorough tutorial on RouteThis Help to set up a blink camera and more.|
|Fix 9: Get in touch with Blink Support||and contact Blink support staff for expert assistance if none of these options resolve your issue.|
The following are the most frequent problems that Blink cameras encounter:
- Audio issues
- Problems with the video’s quality
- Videos are not being saved
- Failure to effectively transmit motion alerts
- Unresponsiveness of the device
How to Fix if Blink Cameras Are Not Working?
Fix 1: Check the Led Indicator Light
You can determine the causes of the problem by looking at the LED indicator light on the Blink camera. There can be a connectivity issue if the LED light has gone RED. Open your Blink App and log in to verify the network situation.
The blinking camera may interfere with your ability to connect if your connection strength is less than three bars. A steady blue light indicates that your camera is recording video but you are unable to view it; this is a typical occurrence with the Blink camera.
Fix 2: Power Cycle Blink Sync Module
- Power cycling only involves restarting and re-establishing Wi-Fi connectivity on your sync module.
- Remove the power line from the wall outlet to reset the device’s power.
- Take out the sync module’s batteries as well.
- Wait for at least 30 seconds.
- After that, install the batteries and reconnect the cord to the wall socket.
- Then, switch the gadget on and see if it functions.
- If the LED indicator becomes green or blue, you should attempt more troubleshooting steps or replace your router.
Fix 3: Ensure That the Blink Sync Module Is Not Too Far From the Router
- It is important to avoid placing the router too far away from the Blink sync module since doing so makes it harder to establish Wi-Fi connections.
- For a solid internet connection, it is advised to position the blink sync module close to the router.
- Check to see whether the issue is fixed after moving the sync module closer to the router.
Fix 4: Power Cycle Your Router
- If Your router has frequently failed to provide internet for the sync module. In this case, you must power cycle your router.
- Remove the router’s power cable from the wall outlet.
- wait for a full minute.
- Reconnect the power wire to the wall outlet and check to see whether the internet connection is active.
Fix 5: Contact Your Internet Service Provider
- If you discover that your internet is not functioning and you have done everything to fix your internet connection and it is still causing problems, now is the time to call your internet provider.
- If the internet is down, they will inform you and provide information on how long it will take to restore service.
- They will assist you in re-establishing your internet connection if the internet is not down but you are still experiencing problems.
Fix 6: Factory Reset the Blink Camera
If your internet is running properly but your blink camera is experiencing frequent connection issues, a factory reset will be your best bet to solve the issue.
- On the back of the camera, look up for the Reset button, which is typically adjacent to the batteries.
- The Reset button’s placement may vary across models; consult the handbook for specific model information.
- Press and hold the reset button for 10 seconds with a pencil, pen, or another similar instrument.
- A red LED light will start to blink when the device has been successfully reset.
- You should reconnect the device and sync the module to the app and WiFi after performing a device reset.
- Next, see if the problem is fixed.
Fix 7: Use Another Power Source
- Remove the batteries from the camera and attach them to a USB cable and USB power adapter to test a different power source.
- The camera can function without batteries by being connected to a wire and an additional power source.
- Your batteries are defective if your camera functions properly when powered by a different source.
Fix 8: Look Into the Routethis Help Guide
- Take the assistance of Route this Help for better technical support if the previous troubleshooting methods were unable to resolve your issue.
- Technical experts will be able to assess your issues whether they relate to wireless networks or anything else.
- This will assist them in identifying the problem and locating further troubleshooting solutions.
- Blink has provided a thorough tutorial on RouteThis Help, which you can access here.
Fix 9: Get in Touch With Blink Support
You only have one choice left if none of the aforementioned troubleshooting methods work for you: contact Blink Cameras customer service. With their expertise, they will support you and direct you to possible solutions.
Frequently Asked Questions
Why is my second Blink camera not working?
Due to a weak signal, your second Blink camera might not be functional. This makes it unable to communicate with the Sync Module. Move the camera closer to the Sync Module to fix it. Make sure they are no more than 100 feet apart.
Is there a reset button on the Blink camera?
Blink cameras have a reset button. Depending on the model, the placement would vary. On a few, it is located in the battery compartment. On some versions, it is located on the camera’s base. However, it is more practical to reset the Sync Module if the camera is connected to one.
Why does my blink camera say Live View failed?
Connectivity problems drained batteries, and incorrect positioning of the sync module are all potential causes of your Blink camera’s Live View malfunction.
How do you reset a Blink camera?
When a blink camera is not working properly you need to reset it. First of all, you will press and hold a reset button, and suddenly a red light will display. This will help you resolve your issue. When you will release the button both red and blue color lights will be flashed.
What does it mean when a blink camera flashes red?
The batteries of blink cameras flash red 5 or 6 times, this happens mostly when the blue light goes out.
You need to have Lithium non-rechargeable batteries. The blinking camera may interfere with your ability to connect if your connection strength is less than three bars.
- The Blink camera security system for your house relies on a network of wires to function properly.
- The Sync Module is used to connect your system to the Blink servers.
- To operate at their best, blink cameras need a strong connection to your Wi-Fi network.
- You must position the sync module properly and use the Blink app to test the signal’s strength to make sure your Blink camera has a solid internet connection.
- Regularly check the battery life of your Blink cameras.
- You can always contact the Blink support staff for expert assistance if none of these options resolve your issue.
How to Reset a Samsung TV Remote (Find Out)
Can You Screen Mirror on Insignia TV?
Why Is My Ecobee Flashing Green Light? (How To Fix It)
Click here to view the Visual Story Version of this Article.